DR5200
3.4 Minimum power supply voltage
Use these graphs to find the minimum power supply voltage for a given current output load.
Non-Ex and Hazardous Location approved (Ex i / IS) devices
Figure 3-8: Minimum power supply voltage for an output of 22 mA at the terminals (Non-Ex and Hazardous Location
approval (Ex i / IS))
X: Power supply U [V DC]
Y: Current output load R
Hazardous Location (Ex d / XP/NI) approved devices
Figure 3-9: Minimum power supply voltage for an output of 22 mA at the terminals (Hazardous Location approval (Ex d /
XP/NI))
X: Power supply U [V DC]
Y: Current output load R
DR5200QS-LM, EDO#6-13-112 - Issue #3
[Ω]
L
[Ω]
L
www.drexelbrook.com
ELECTRICAL CONNECTIONS
3
36