Table of Contents
Advertisement
•
Attachment Ring: No cracks or signs of wear are acceptable. Any signs of corrosion
requires replacement.
•
Attaching Hardware: Inspect all attaching hardware to ensure there are no missing
components and hardware is properly tightened.
•
Platform Rails: No visible damage is acceptable.
6.3
FABRIC MESH TO MID OR TOP RAIL
Figure 23. Fabric Mesh to Mid Rail
The Fabric Mesh accessory consists of a flame retardant, lightweight mesh which is
attached to the mid platform rail or the top platform rail.
6.4
FALL ARREST PLATFORM
Note: See the JLG External Fall Arrest System manual (PN 3128935) for more detailed
information.
The external fall arrest system is designed to provide a lanyard attach point while
allowing the operator to access areas outside the platform. Exit/enter the platform
through the gate area only. The system is designed for use by one person.
Personnel must use fall protection at all times. A full body harness is required with
lanyard not to exceed 6 ft (1.8 m) in length, that limits the maximum arrest force to 900
lb (408 kg) for the transfastener type and 1350 lb (612 kg) for the shuttle type fall arrest
system.
800AJ HC3
BM000014A
Figure 24. Fabric Mesh to Top Rail
31222411
Accessories
BM000013A
103
Advertisement
Table of Contents
