Time Gate Trigger Type (Option 1D6 Only) - Agilent Technologies EMC Series Programmer's Manual

Language Reference
[:SENSe]:SWEep Subsection
Factory Preset
and *RST: Off
Front Panel
Access: Sweep, Gate, Gate On Off

Time Gate Trigger Type (Option 1D6 Only)

[:SENSe]:SWEep:TIME:GATE:TYPE LEVel|EDGE
[:SENSe]:SWEep:TIME:GATE:TYPE?
Selects between edge and level mode for time-gated spectrum analysis.
Level triggers the gate when the signal surpasses a specific level, set to either
low or high.
Edge triggers the gate when the edge of a signal is encountered, set to either a
negative-going edge or a positive-going edge.
Factory Preset
and *RST: Edge
Front Panel
Access:
Sweep, Gate, Gate Control Edge Level
302 Chapter 5