Advertisement
Language Reference
[:SENSe]:BANDwidth Subsection
[:SENSe]:BANDwidth Subsection
Resolution Bandwidth
[:SENSe]:BANDwidth|BWIDth[:RESolution] <freq>
[:SENSe]:BANDwidth|BWIDth[:RESolution]?
Specifies the resolution bandwidth.
Example:
BAND 1 kHz
Range:
10 Hz to 5 MHz (with Option 1DR)
1 Hz to 5 MHz (E7401A, E7402A, E7403A, E7404A, E7405A
with Option 1D5)
Default Unit:
Hz
Front Panel
Access:
BW/Avg, Resolution BW Auto Man
Resolution Bandwidth Automatic
[:SENSe]:BANDwidth|BWIDth[:RESolution]:AUTO OFF|ON|0|1
[:SENSe]:BANDwidth|BWIDth[:RESolution]:AUTO?
Couples the resolution bandwidth.
Factory Preset
and *RST:
On
Example:
BWID:AUTO On
History:
This command function changed with firmware revision
A.08.00. With :AUTO ON in zero span, an error will be
generated.
Remarks:
Auto-couple resolution bandwidth is not available in zero span.
Resolution Bandwidth Mode
[:SENSe]:BANDwidth|BWIDth[:RESolution]:MODE EMI|SAN|OFF
[:SENSe]:BANDwidth|BWIDth[:RESolution]:MODE?
Couples the resolution bandwidth to the frequency span in SAN mode, to Center
Frequency in EMI mode, or uncoupled when OFF.
Factory Preset
and *RST:
EMI
272
Chapter 5
Advertisement
