Programming Command Cross-References
Functional Index to SCPI Subsection
Functional Index to SCPI Subsection
The following table lists the SCPI subsections or subsystems associated with the
instrument function category you wish to perform. The commands listed that begin
with an asterisk (*) are IEEE common commands. These commands, and the SCPI
commands in the subsection or subsystem, are documented in
"Language Reference,"
Function Category
ALIGNMENT
ATTENUATOR
BANDWIDTH
CONFIGURATION and STATUS
CONTROL
CORRECTED MEASUREMENTS
COUPLING
DELETE, LOAD, OR SAVE
DEMODULATION
DISPLAY
EMI DIAGNOSTICS
EMI MEASUREMENTS
FREQUENCY
FREQUENCY SPAN
186
on page 189.
SCPI Subsection or Subsystem
*CAL?
*TST?
:CALibration
:STATus:QUEStionable
see function category: Internal
Attenuation and Source
:CALCulate
:INITiate
:MEASure
[:SENSe]:BANDwidth
*RCL <register>
*SRE <integer>
*STB?
:SYSTem
:ABORt
[:SENSe]:CORRection
:COUPle
[:SENSe]:BANDwidth
*SAV <register>
:MMEMory
[:SENSe]:DEMod
:UNIT
:MEASure
:MEASure
[:SENSe]:EMI
[:SENSe]:FREQuency
:STATus:QUEStionable
[:SENSe]:FREQuency
Chapter 5,
Chapter 4