Download Print this page

Programming Examples System Requirements - Agilent Technologies EMC Series Programmer's Manual

Spectrum analyzers 9 khz-1.5/3.0/6.7/13.2/26.5 ghz
Hide thumbs Also See for EMC Series:

Advertisement

Programming Examples System Requirements

These examples were written for use on an IBM compatible PC configured as
follows:
Pentium processor
1
Windows 95
or Windows NT 4.0 operating system
C programming language
National Instruments GPIB interface card (for analyzers with Option A4H)
National Instruments VISA Transition Libraries (VTL)
COM1 serial port configured as follows (for analyzers with Option 1AX)
— 9600 baud
— 8 data bits
— 1 stop bit
— no parity bits
— hardware flow control
A HP/Agilent 82341C card may be substituted for the National Instruments GPIB,
and the HP VISA libraries may be substituted for the National Instruments VISA
Transition Libraries. If substitutions are made, the subdirectories for the include
and library files will be different than those listed in the following paragraphs.
Refer to the documentation for your interface card and the VISA libraries for
details.
1. Microsoft is a U.S. registered trademark of Microsoft Corporation.
Chapter 3
Programming Examples
Programming Examples System Requirements
95

Advertisement

loading

This manual is also suitable for:

E7404aE7402aE7405aE7401aE7403a