Delete A Directory - Agilent Technologies EMC Series Programmer's Manual

Language Reference
MMEMory Subsystem
a Contents
Column
7 Comment (enclosed in double quotes)
8 Marked/unmarked state (0=unmarked, 1=marked)
9 Uncertainty (MHz)
10 Status word (used internally)
11 Peak delta from limit line 1
12 Peak delta from limit line 2
13 Quasi-peak delta from limit line 1
14 Quasi-peak delta from limit line 2
15 Average delta from limit line 1
16 Average delta from limit line 2
a. An asterisk (*) in the column indicates that the data was missing or not
applicable at the time the signal list data was saved to disk.
Front Panel
Access:
File, Save, Signal List
File, Load, Signal List

Delete a Directory

:MMEMory:RDIRectory <dir_name>
Deletes the specified directory and all files and subdirectories within that directory.
Front Panel
Access:
File, Delete
Store a Corrections Table to a File
:MMEMory:STORe:CORRection
ANTenna|CABLe|OTHer|USER,<file_name>
Stores the specified correction set to the file named <file_name>.
Example:
:MMEM:STOR:CORR ANT, "A:TEST1.ANT"
Remarks: This command will fail if the <file_name> already exists.
Front Panel
Access:
File, Save, Type, Corrections
264 Chapter 5