Advertisement
Trigger
*TRG
This command triggers the instrument. Use the
:TRIGger:SEQuence:SOURce command to select the trigger source.
Remarks:
See also the :INITiate:IMMediate command
Self Test Query
*TST?
This query is used by some instruments for a self test.
For Agilent ESA analyzers, *TST? always returns 0; no tests are performed.
Front Panel
Access:
System, Alignments, Align All Now
Wait-to-Continue
*WAI
This command causes the instrument to wait until all pending commands are
completed before executing any additional commands. There is no query form to
the command.
Chapter 5
Language Reference
IEEE Common Commands
197
Advertisement
