Monitoring Signals; Monitoring Value Tables; Monitoring Values 1 (Control Panel: Menu M1.1); Monitoring Values 2 (Control Panel: Menu M1.2) - Danfoss Vacon NXP Applications Manual

20 · vacon

3. Monitoring signals

The menu M1 (Monitoring) has all the monitoring values. Values are only for monitoring, and cannot
be altered on the control panel.
3.1

Monitoring value tables

3.1.1

Monitoring values 1 (Control panel: menu M1.1)

Code
V1.1.1
V1.1.2
V1.1.3
V1.1.4
V1.1.5
V1.1.6
V1.1.7
V1.1.8
V1.1.9
V1.1.10
V1.1.11
V1.1.12
V1.1.13
V1.1.14
V1.1.15
3.1.2

Monitoring values 2 (Control panel: menu M1.2)

Code
V1.2.1
V1.2.2
V1.2.3
V1.2.4
V1.2.5
V1.2.6
V1.2.7
V1.2.8
V1.2.9
V1.2.10
V1.2.11
3
Parameter Unit
DC-Link Voltage
DC Voltage Ref. %
DC Voltage Act. %
Total Current
Active Current %
Reactive Current %
Power kW kW
Power % %
Status Word
Supply Frequency Hz
Supply Voltage
Line Frequency D7 Hz
Line Voltage D7
AC Voltage Reference
DC Ref Max Lim %
Parameter
DC Voltage
Operation Mode
Used Current Ref
D7 Synch. Error
Cos Phi Actual
Unit Temperature
Freq. Reference
Current
SG Synch Error
Operation Hours
Reactive Current
ID
Measured DC Link voltage in volts,
V 1108
filtered.
Used DC voltage reference by the
regenerative unit in % of Nominal DC
1200 voltage.
Nominal DC voltage = 1.35 * supply
voltage
7 Same scaling as DC Voltage Ref.
A 1104 Filtered current
> 0 power from AC side to DC side
1125
< 0 power from DC side to AC side
1157
> 0 power from AC side to DC side
1508
< 0 power from DC side to AC side
> 0 power from AC side to DC side
5
< 0 power from DC side to AC side
43
1 Drive output frequency
V 1107 Drive output voltage
1654 Measured line frequency
V 1650 Measured line voltage
V 1556 Used AC Voltage Reference
1606 Internal limit for DC Voltage Ref.
Unit ID Description
Measured DC Link voltage in
V 44
volts, unfiltered.
0 = AFE
1615 1 = Island
2 = Micro Grid
Used current reference is
negated to parameter value.
% 1704
Made to compare values in
NCDrive easier to Active current
Synchronisation error to
1659
external grid
1706
°C 1109
Hz 1752 Used line frequency reference
A 1113 Unfiltered current
Synchronisation error to shaft
1658
generator side
h 1856
% 1389
Tel. +358 (0)201 2121 • Fax: +358 (0)201 2121 205
Monitoring signals
Description