Din Id Control - Danfoss Vacon NXP Applications Manual

112 · vacon
Control
On
Value
Control
Off
value
3 = SR
Input value is used to make a step change in the output between On and Off values.
4 = Scale ABS
5 = Scale Inverted
P2.14.1.8 Control Signal Filtering TC
This parameter is used to filter the scaling function output. This can be used, for
example, when unfiltered torque is used to control a parameter that needs stabilisation.
5.14.2

DIN ID control

This function is used to control any parameter between two different values with a digital input.
Different values are given for DI LOW and DI HIGH.
P2.14.2.1 ID Control Digital Input ID1570
P2.14.3.1 ID Control Digital Input ID1590
P2.14.4.1 ID Control Digital Input ID1578
Select a digital input to be used for controlling the parameter selected by ID1571.
P2.14.2.2 DIN Controlled ID
P2.14.3.2 DIN Controlled ID
5
Negative
On
value
Input values is scaled linearly between On and Off values.
Inverted value is scaled linearly between On and Off values
DI ID Control Digital Input
P Value for LOW
P Value for High
ID1571
ID1575
Off
Off
value
value
Figure 46.
ID1586 "Control Filt TC"
SEL
P
G
IN 0
IN 1
Figure 47.
"ID Control DIN"
"ID Control DIN"
"ID Control DIN"
"Controlled ID"
"Controlled ID"
Tel. +358 (0)201 2121 • Fax: +358 (0)201 2121 205
Description of parameters
Positive
On
value
DIN Controlled ID