Adjusting The Replenishment Rate - Kodak RP X-OMAT M6B Installation Instructions Manual

Adjusting the Replenishment Rate

[1] Remove the outside PUMP COVER by loosening the 2 SCREWS on the top of the PUMP, and lifting the
COVER off.
[2] Rotate the CRANK by hand to gain access to the ADJUSTING SCREW.
[3] Rotate the appropriate fixer or developer ADJUSTING SCREW to provide the correct replenishment
rates.
[4] Install the PUMP COVER.
CRANK
ADJUSTING SCREW
OUTPUT
INCREASE
DECREASE
STROKE INDICATOR
STROKE SCALE
SET SCREW
(DO NOT ADJUST)
42
Do not adjust the SETSCREW or LOCK NUT.
Figure 41 Setting the Replenishment Rate
SCREW (2)
PUMP
COVER
H048_0104BCA
H048_0104BA
246626