Leveling the Processor
To prevent damaging the LEVELING SCREWS and the processor, do not allow more than a
25 mm (1 in.) clearance between the bottom of the processor and the HEAD of the LEVELING
SCREW.
[1]
Install and seat the DEVELOPER, FIXER, and WASH RACK ASSEMBLIES.
DEVELOPER
RACK
[2]
Check that the RACKS are in their correct positions and that the GEARS of the RACK ASSEMBLIES
engage with the GEARS of the MAIN DRIVE SHAFT.
MAIN
DRIVE
SHAFT
GEAR
H108_0063BCA
H048_0101BA
246626
Figure 22 Installing the Rack Assemblies
RACK
ASSEMBLY
GEAR
Figure 23 Positioning the Racks and Gears
WASH
RACK
FIXER
RACK
H048_0096BCA
H048_0096BA
23