User Selectable Modes; Flooded Replenishment; Water Conservation - Kodak RP X-OMAT M6B Installation Instructions Manual

Hide thumbs Also See for RP X-OMAT M6B:

Table of Contents

Factory set to ''OFF'' (Left) position.

This feature is designed for low film usage. When in the ''ON'' (Right) position, it allows for replenishment of

the developer and fixer solutions each time the processor comes out of standby.

Factory set to ''ON'' (Right) position.

[1]

When water conservation is ''ON'', and the processor cycles into standby, no water flows to the

processor except when water is needed for developer cooling. As film is processed, water flows into the

wash tank.

When the processor is not in use, it will continue to cycle in and out of standby without water

flowing to the wash tank.

[2]

When water conservation is ''OFF'', water continually flows to the wash tank as long as the processor is

out of standby.

246626

User Selectable Modes

NOTE

Table of Contents