Installing The Processor; Removing The Processor From The Skid - Kodak RP X-OMAT M6B Installation Instructions Manual

Removing the Processor from the Skid

The processor weighs over 200 kg
(442 lb), therefore use 2 people when
installing the LEVELING SCREWS and
moving the processor into position.
The processor is not attached to the
SKID. Use care when moving the
SKID.
[1] Move the processor, on the SKID, as close as
possible to the processor's final destination.
12

Installing the Processor

PROCESSOR
SKID
Figure 7 Processor Mounted on Skid
H048_0108CCA
H048_0108CA
246626