Installing The Panels And Covers; Setting The Dryer Temperature - Kodak RP X-OMAT M6B Installation Instructions Manual

Installing the Panels and Covers

Install all PANELS and COVERS.
When required by local code, install panel-locking devices. Parts and instructions are included in
the PREPACK.

Setting the Dryer Temperature

[1] Unlock the DRYER TEMPERATURE CONTROL KNOB by rotating the LOCKING RING
counter-clockwise
[2] Set the DRYER TEMPERATURE CONTROL KNOB to the minimum setting required to dry film.
[3] Lock the DRYER TEMPERATURE CONTROL KNOB by rotating the LOCKING RING clockwise
1
approximately ⁄
4
LOCKING
RING
SETSCREW
H048_0105BCA
H048_0105BA
46
1
approximately ⁄ turn.
4
turn.
DRYER TEMPERATURE
CONTROL KNOB
Figure 45 Adjusting the Dryer Temperature Control Knob
NOTE
REPL
SWITCH
246626