Installing The Feed Shelf - Kodak RP X-OMAT M6B Installation Instructions Manual

Installing the Feed Shelf

[1] Install the FEED SHELF using the 5 SCREWS, 5 WASHERS, and 5 LOCK WASHERS.
WING NUT (3)
AUXILIARY
RUN SWITCH
CONNECTOR
[2] Install the FILM GUIDE onto the FEED SHELF using the 3 WING NUTS and 3 WASHERS.
[3] Plug the AUXILIARY/RUN SWITCH CONNECTOR into the RECEPTACLE.
18
NOTE
Do not tighten the SCREWS.
FEED SHELF
SCREW (5)
RECEPTACLE
Figure 13 Installing the Feed Shelf
NOTE
Do not tighten the WING NUTS.
WASHER (5)
LOCK WASHER (5)
H048_0071BCC
SCREW (5)
H048_0071BA
246626