Selecting The Replenishment Mode - Kodak RP X-OMAT M6B Installation Instructions Manual

Selecting the Replenishment Mode

[1] To access SWITCH U20 on the 100 CIRCUIT BOARD, open the ELECTRICAL BOX DOOR.
[2] If the customer requires FLOODED REPLENISHMENT, set the SWITCH U20-1 to the right (ON).
[3] If the customer requires no WATER CONSERVATION, set the SWITCH U20-2 to the left (OFF).
[4] U20-3 must be set to the right (ON) position.
[5] U20-4 must be set to the left (OFF) position.
ELECTRICAL
BOX DOOR
36
U20
SWITCHES
Figure 36 Setting Switch U20 on the 100 Circuit Board
100 CIRCUIT BOARD
H048_0099DCA
H048_0099DA
246626