6G4-4 CRANKING SYSTEM
1. Negative (–) battery cable
2. Battery
1. Starting motor
2. Battery cable
3. Magnetic switch lead wire connector
1. Starting motor
2. Starting motor mount bolts
UNIT REPAIR OVERHAUL
DISMOUNTING
1) Disconnect negative (–) battery cable at battery.
2) Disconnect magnetic switch lead wire and battery cable from
starting motor terminals.
3) Remove left side engine under cover.
4) Remove 2 starting motor mount bolts.
5) Dismount starting motor.
REMOUNTING
Reverse the dismounting procedure.
Tightening Torque
(a): 10 N·m (1.0 kg-m, 7.5 Ib-ft)