Chrysler Concorde 1993 Service Manual page 84

2 - 62 SUSPENSION AND DRIVESHAFTS
Fig. 8 Trailing Arm To Spindle Bracket Bolt
Fig. 9 Lateral Links To Spindle Attaching Bolt
Fig. 10 Spindle To Strut Assembly Pinch Bolt
INSTALLATION
(1) Install spindle onto the bottom of the strut as-
sembly (Fig 13). Push and or tap spindle assembly
onto strut, until notch in spindle is tightly seated
against locating tap on strut assembly (Fig. 13).
Fig. 11 Center Punch Installed In Spindle
Fig. 12 Removing Spindle From Strut Assembly
Then remove center punch from hole in spindle. In-
stall spindle to strut assembly pinch bolt into spindle
(Fig. 13). Torque spindle to strut assembly pinch bolt
to 55 N¼m (40 ft. lbs.).
Fig. 13 Spindle Mounted To Strut Assembly