Chrysler Concorde 1993 Service Manual page 343

Fig. 5 Tail, Stop, Back-up and Turn Signal Lamp
TRUNK LID APPLIQUE LAMP BULB
REMOVAL
(1) Remove trunk lid applique.
(2) Remove socket from applique lamp.
(3) Pull bulb from socket.
INSTALLATION
(1) Insert bulb into socket.
(2) Install socket in applique lamp.
(3) Install trunk lid applique on vehicle.
Bulb
LICENSE PLATE LAMP BULB
REMOVAL (FIG. 6)
(1) Release trunk latch and open trunk.
(2) Remove license plate lamp from trunk lid or
fascia.
(3) Remove socket from license plate lamp.
(4) Pull bulb from socket.
INSTALLATION
(1) Insert bulb into socket.
(2) Install socket in license plate lamp.
(3) Install license plate lamp in trunk lid fascia.
(4) Verify lamp operation.
Fig. 6 License Plate Lamp Bulb—Typical
LAMPS 8L - 7