Chrysler Concorde 1993 Service Manual page 217

3.3/3.5L Engine Accessory Drive Belt Service
GENERAL INFORMATION
PROPER BELT TENSION
Satisfactory performance of the belt driven accesso-
ries depends on belt condition (Fig. 1) and proper belt
tension.
BELT TENSION GAUGE METHOD
Use belt tensioning Special Tool Kit C-4162 for:
• For conventional belts and Poly-V belts.
Adjust the belt tension for a New or Used belt ten-
sion applications:
• Used Belt — 534 N (120 lbs.)
• New Belt — 667
3.3/3.5L ENGINE ACCESSORY DRIVE BELT
SERVICE
GENERATOR, POWER STEERING PUMP, AIR
CONDITIONING COMPRESSOR AND WATER
PUMP DRIVE BELT SERVICE
GENERATOR/POWER STEERING PUMP AND WATER PUMP
BELT— 3.3L ENGINE
The Poly-V generator/power steering and water
pump belt is provided by an adjusting screw on the
ACCESSORY DRIVE BELTS
44 N (150 10 lbs.)
ACCESSORY DRIVE BELTS DIAGNOSIS
INDEX
page
. . . 19 General Information
generator mounting bracket (Fig. 3) to maintain
proper belt tension. To remove or install this belt,
Release tension by loosening the generator mounting
bolt A and adjusting bolt locknut B then loosen ad-
justing bolt (Fig. 3). Reverse procedure to install and
tighten belt to specified tension.
GENERATOR/POWER STEERING PUMP BELT— 3.5L ENGINE
The Poly-V generator/power steering belt is pro-
vided by adjustable tensioner pulley located on the
timing belt cover (Fig. 4) to maintain proper belt ten-
sion. To remove or install this belt, Release tension
COOLING SYSTEM
. . . . . . . . . . . . . . . . . . . . . . . 19
Fig. 1 Drive Belt Inspection
7 - 19
page