Chrysler Concorde 1993 Service Manual page 161

Fig. 4 Removing Shoe and Upper Spring
Fig. 5 Removing Front Holddown Clip And Shoe
(4) Install lower parking brake, shoe to shoe re-
turn spring (Fig. 7).
(5) Install parking brake shoe adjuster assembly
with star wheel rearward (Fig. 8).
(6) Install rear, parking brake shoe holddown clip
(Fig. 9).
(7) Adjust parking brake shoes to a diameter to
171 mm (6.75 inch).
(8) Install rear hub and bearing assembly on spin-
dle.
Fig. 6 Installing Upper Spring
Fig. 7 Installing Lower Spring
(9) Install hub and bearing assembly, thrust
washer and retaining nut. Torque the hub and bear-
ing assembly retaining nut to 168 N¼m (124 ft. lbs.).
(10) Install the nut lock and cotter pin on the rear
spindle. Then install hub and bearing assembly dust
cap.
(11) Install rear braking disc.
(12) Install rear, disc brake caliper on the adapter
(See Brake Shoe Removal).
(13) Install wheel and tire assemblies.
BRAKES 5 - 67