Chrysler Concorde 1993 Service Manual page 661

21 - 62 TRANSAXLE
If the output sprocket is higher than transfer
sprocket, subtract the amount measured to the shim
that was installed during measurement process (Fig.
8).
Fig. 8 Checking Sprocket Height
OUTPUT SPROCKET SPACER CHART
DIFFERENTIAL RECONDITION
The valve body and solenoid wiring connector must
be removed from the transaxle in order to recondi-
tion the transaxle differential. The transfer shaft
cannot be removed with the valve body in place. Re-
fer to Valve Body Recondition for removal procedure.
If any bearings in the differential require replace-
ment, then all the bearings on the differential carrier
and transfer shaft must also be replaced. The differ-
ential adjusters must also be replaced when differen-
tial bearings are replaced.
DISASSEMBLY
Fig. 1 Remove Chain Cover
Fig. 2 Remove Chain Oiler
Fig. 3 Remove Chain Snubber