Chrysler Concorde 1993 Service Manual page 654

Fig. 15 OD/UD Reaction Plate
Fig. 16 Tapered Snap Ring
Snap ring ends must be located within one
finger of the input clutch hub. Be sure that snap
ring is fully seated, by pushing with screwdriver,
into snap ring groove all the way around.
Fig. 17 Seating Tapered Snap Ring
Fig. 18 Set Up Dial Indicator for Clutch Clearance
Fig. 19 Use Hook Tool to Raise One Clutch Disc
Underdrive clutch pack clearance must be 0.91
to 1.47 mm (.036 to .058 inch). Select the proper
reaction plate to achieve specifications:
UNDERDRIVE REACTION PLATE CHART
TRANSAXLE 21 - 55