Sensor Reception - Agatec EZDigPro User & Calibration Manual

[troubleshooting]
SENSORS CHECK
USER MENU
Contrast:
Language:
UnitMeasur
Resolution .00
Advan.Mode OFF
Machine
Parameters
Sensors Check
Calibration Menu
Here you can see the measured sensor angle (this angle is not the machine real angle!).
You can use this page to check if and what sensor is assigned to a specific slot.
Just by moving the sensor, you will see the relevant angle changing.
Ang 1 – Boom 1 sensor angle
Ang 2 – Boom 2 sensor angle
Ang 3 – Boom 3 sensor angle
Ang 4 – Bucket sensor angle
Batt 1 – Boom 1 sensor battery level %
Batt 2 – Boom 2 sensor battery level %
Batt 3 – Boom 3 sensor battery level %
Batt 4 – Bucket sensor battery level %
Laser – Latest offset value received from laser receiver sensor.
EZDigPro

Sensor Reception

SENSORS VALUES
60 Ang 1
EN Ang 2
Ang 3
M
Ang 4
Batt 1
1 Batt 2
Batt 3
Batt 4
Laser
0
0
0
0
0
0
0
0
0
- 92 - User & Calibration Manual