Sensors - Agatec EZDigPro User & Calibration Manual

[installation] Components Installation

Sensors

Magnets
Charging
Sensors are equipped with batteries charged through solar cells.
The supplied multi-charger might be necessary to externally charge the sensors.
Charge the batteries for at least 8 hours before the first use of the system.
By doing this, the batteries will be able to charge to their full capacity
during the following discharge-charge cycles.
EZDigPro
Pay Attention!
Sensors are equipped with magnets. Magnetic fields
in proximity can cause interference with pacemakers
and other medical devices.
- 11 -
Solar Cells
User & Calibration Manual