Troubleshooting Battery Level - Agatec EZDigPro User & Calibration Manual

[troubleshooting]
BATTERY LEVEL
When a sensor has 10% capacity left, the system automatically jumps to this page to show the low battery warning.
Every sensor is represented by a battery.
2 Booms excavator:
Bucket
Dipper Stick
Boom
3 Booms excavator:
Bucket
Dipper Stick
Articulated Boom
Boom
You can continue working by using
The low battery page will pop up again every 10 minutes if the battery is still low.
At 0% of capacity, the page stays on the screen (it's not possible to work; the sensor will be dead in a few minutes).
If you wish to see the % capacity of each battery, see next page.
EZDigPro
Battery Level
-
to go to another screen.
- 91 - User & Calibration Manual