Access To Calibration Functions - Agatec EZDigPro User & Calibration Manual

[calibration]

Access To Calibration Functions

From the working screen (operative mode) or the alarm page, press & hold
Scroll the cursor down with
Press to enter into calibration.
Enter
USER MENU
USER MENU
Sensors Check
Sensors Check
Calibration Menu
Calibration Menu
If a calibration password is not needed (default mode), see next page to continue.
If a password has been set, the system will prompt for it.
CALIBRATION
CALIBRATION
PIN :
PIN :
Confirm
Confirm
Scroll to Confirm and press
If the password is incorrect, the message "Access denied!" will be displayed.
Press the button to return to the operation mode.
EZDigPro
-
to reach the "Calibration Menu" line.
0
0
Enter
Enter
- 24 -
to enter into the USER MENU.
User & Calibration Manual