D Function Screen - Icom IC-9700 Basic Manual
Vhf/uhf all mode transceiver
Hide thumbs
Also See for IC-9700:
- Advanced manual (173 pages) ,
- Service manual addendum (163 pages) ,
- Service manual (93 pages)
Table of Contents
Advertisement
1
PANEL DESCRIPTION
Touch panel (Continued)
D FUNCTION screen
Function
name
Selected
value
Lights
blue when
active
z Push
to open the FUNCTION screen in
FUNCTION
the selected mode.
LTo close the FUNCTION screen, push
L Touching q or w at the bottom of the screen selects
Function screen 1 or 2.
FUNCTION screen list
*
1
Touch for 1 second to select the function.
*
2
Touch for 1 second to open its function menu.
*
2
P�AMP/ATT
AGC
OFF
FAST
P.AMP
MID
*
SLOW
ATT
1
*
2
NR
IP+
OFF
OFF
ON
ON
*
2
COMP
OFF
OFF
ON
TONE
TSQL
*
2
D�SQL
TBW
OFF
WIDE
DSQL
MID
CSQL
NAR
*
2
DUP
EXP P�AMP
OFF
OFF
DUP–
ON
DUP+
.
EXIT
*
*
NOTCH
2
NB
OFF
OFF
AN
ON
MN
*
2
VOX
BKIN
OFF
OFF
ON
BKIN
F-BKIN
*
2
TONE
DTCS
DTCS (T)/TSQL (R)
DTCS (T)
TONE (T)/TSQL (R)
TONE (T)/DTCS (R)
1/4
MONI
OFF
OFF
ON
ON
RPS
TX PWR LIMIT
OFF
OFF
ON
ON
D MENU screen
z Push
MENU
selected band.
LTo close the MENU screen, push
L Touching q or w on the bottom of the screen selects
MENU screen 1 or 2.
D QUICK MENU
2
*
2
z Push
QUICK
*
2
*
2
1-6
to open the MENU screen on the
EXIT
to open the QUICK MENU screen.
.
- Quick Links:
- Rear Panel
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-9700 and is the answer not in the manual?
Questions and answers
Hi I cannot get my ic7900 to work on independe freq and green light sub is on plus I got main rev and sub in my screen .and cannot get my transceiver work with DUB function.on 2 meter please can you help ?
To resolve the issue where the Icom IC-9700 is not working on an independent frequency with the green Sub light on and the Dualwatch (DUB) function not functioning on 2 meters:
1. Confirm Dualwatch is Enabled: Hold down the OFF button for 1 second to turn the Dualwatch function ON. This activates independent monitoring of both Main and Sub bands.
2. Select the Proper Band: Touch the grayed frequency readout to select the active band. Ensure the Main and Sub bands are set to different frequencies and not both on 2 meters, as the same frequency cannot be set on both bands.
3. Check Band Settings: Ensure that the Sub band is not set to the same frequency or band as the Main. The IC-9700 supports independent operation on different bands, but not the same frequency on both Main and Sub.
4. Verify TX is on Main Band: Transmission is only possible on the Main band (except in Split Frequency mode), so ensure the Main band is the one you intend to transmit on.
5. Check for Mode Compatibility: Some functions only apply to the selected band and mode. Confirm that the correct mode (FM, SSB, etc.) is selected for the band in use.
Following these steps should allow independent frequency operation with Dualwatch enabled.
This answer is automatically generated