Scope Operation ��������������������������������������� - Icom IC-9700 Basic Manual

Spectrum scope screen
The spectrum scope enables you to display the
activity on the selected band, as well as the relative
strengths of various signals.
The transceiver has two spectrum scope modes, the
Center mode and the Fixed mode.
You can also turn the Waterfall display ON or OFF.
In addition, you can select the Mini scope to display it
in a smaller size on the screen.
• Center mode screen
Span (Display range)
MAIN/SUB band icon
Center/Fixed mode icon
Span (Display range)
Operating frequency (stays on Center)
Waterfall zone
• Fixed mode screen
MAIN/SUB band icon
Center/Fixed mode icon
Edge (Lower frequency)
Operating frequency (moves)
Waterfall zone
D Marker
The Marker displays the operating frequency in the
SPECTRUM SCOPE screen.
: The RX marker displays the re-
ceive frequency.
: The TX marker displays the trans-
mit frequency.
• About RX Marker
In the Fixed mode, the RX Marker displays the
operating frequency within a specified frequency
range. So, the transceiver always displays the RX
marker in the scope screen.
In the Center mode, the operating frequency stays on
the Center of the screen. Thus, the transceiver does
not display the RX Marker.
L When the Hold function is ON, the RX Marker is displayed
to indicate the operating frequency's position.
Grid (frequency/level)
FFT scope zone
(FFT: Fast Fourier Transform)
Edge (Upper frequency)
Grid (frequency/level)
FFT scope zone
SCOPE OPERATION
D Using the Spectrum Scope
Display the SPECTRUM SCOPE screen.
» SCOPE
MENU
MAIN/SUB band icon*
* Touch the MAIN/SUB band icon selects the displayed band.
Key
< 1 >
Selects the Function menus.
< 2 >
Touch
SPAN
Touch for
1 second
In the Fixed mode, selects the Edge
frequencies.
L You can set the upper and lower edge
EDGE
frequencies in the "Fixed Edges" item on
the SCOPE SET screen by touching [EXPD/
SET] for 1 second.
Touch
HOLD
Touch for
1 second
CENT/FIX Selects the Center or Fixed mode.
Touch
EXPD/
SET
Touch for
1 second
Opens the Reference level window.
L Rotate
REF
level.
L Touch again to close the window.
Selects the sweep speed.
SPEED
• "" (FAST), "" (MID), or "" (SLOW).
MARKER Selects the Marker.
5-1
MENU 1: Center mode
MENU 1: Fix mode
MENU 2: Center/Fix mode
Action
In the Center mode, selects the
scope span.
• Spans: ±2.5, 5.0, 10, 25, 50, 100,
250 and 500 kHz
Resets to the ±2.5 kHz span.
Sets the Hold function to ON or
OFF.
• " " and the Marker are
HOLD
displayed. Freezes the current
spectrum.
Clears the Peak Hold level.
Selects the Expanded or Normal
screen.
Displays the SCOPE SET screen.
to adjust the Reference
MAIN DIAL
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21