Qso/Rx Log - Icom IC-9700 Basic Manual
Vhf/uhf all mode transceiver
Hide thumbs
Also See for IC-9700:
- Advanced manual (173 pages) ,
- Service manual addendum (163 pages) ,
- Service manual (93 pages)
Table of Contents
Advertisement
QSO/RX Log
» SET > QSO/RX Log
MENU
QSO Log
Selects whether or not to make a communication log
on an SD card.
The communication log is made on an SD card, and
saved in the "csv" format.
LThis function requires an SD card (User supplied).
• OFF: The QSO Log function is OFF.
• ON:
The transceiver makes a log on the SD card.
The transceiver starts making a log when you
begin talking.
TIP:
• The folder name is automatically created, as
[IC-9700\QsoLog].
• The file name is automatically created, as shown in
the example below:
Log start date and time: 1st January 2019 15:30:00
File name:
• The log contents is not displayed on the
transceiver.
• You can display the log contents on a PC.
RX History Log
Selects whether or not to make a DV mode's receive
history log on an SD card.
The receive history log is made on an SD card, and
saved in the "csv" format.
LThis function requires an SD card (User supplied).
• OFF: The RX History Log function is OFF.
• ON:
The transceiver makes a DV mode's receive
history log on the SD card.
The transceiver starts making a receive
history log when you finish talking.
TIP:
• The folder name is automatically created, as
[IC-9700\RxLog].
• The file name is automatically created, as shown in
the example below:
Log start date and time: 1st January 2019 15:30:00
File name:
• The log contents is not displayed on the
transceiver.
• You can display the log contents on a PC.
(Default: OFF)
20190101_153000.csv
(Default: OFF)
20190101_153000.csv
» SET > QSO/RX Log > CSV Format
MENU
Separator/Decimal
Select the separator and the decimal character for the
CSV format.
• Sep [,] Dec [.]: Separator is "," and Decimal is "."
• Sep [;] Dec [.]: Separator is ";" and Decimal is "."
• Sep [;] Dec [,]: Separator is ";" and Decimal is ","
* The default value may differ, depending on the transceiver
version.
Date
Select the date format between "yyyy/mm/dd," "mm/
dd/yyyy" and "dd/mm/yyyy." (y: year, m: month, d: day)
* The default value may differ, depending on the transceiver
version.
8-8
8
SET MODE
(Default: Sep [,] Dec [.]*)
(Default: mm/dd/yyyy*)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
- Quick Links:
- Rear Panel
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-9700 and is the answer not in the manual?
Questions and answers
Hi I cannot get my ic7900 to work on independe freq and green light sub is on plus I got main rev and sub in my screen .and cannot get my transceiver work with DUB function.on 2 meter please can you help ?
To resolve the issue where the Icom IC-9700 is not working on an independent frequency with the green Sub light on and the Dualwatch (DUB) function not functioning on 2 meters:
1. Confirm Dualwatch is Enabled: Hold down the OFF button for 1 second to turn the Dualwatch function ON. This activates independent monitoring of both Main and Sub bands.
2. Select the Proper Band: Touch the grayed frequency readout to select the active band. Ensure the Main and Sub bands are set to different frequencies and not both on 2 meters, as the same frequency cannot be set on both bands.
3. Check Band Settings: Ensure that the Sub band is not set to the same frequency or band as the Main. The IC-9700 supports independent operation on different bands, but not the same frequency on both Main and Sub.
4. Verify TX is on Main Band: Transmission is only possible on the Main band (except in Split Frequency mode), so ensure the Main band is the one you intend to transmit on.
5. Check for Mode Compatibility: Some functions only apply to the selected band and mode. Confirm that the correct mode (FM, SSB, etc.) is selected for the band in use.
Following these steps should allow independent frequency operation with Dualwatch enabled.
This answer is automatically generated