Monitor Function - Icom IC-9700 Basic Manual

Monitor function

The Monitor function enables you to monitor your
transmit audio. Use this function to check the
voice characteristics while adjusting transmit audio
parameters.
L You can hear the CW sidetone regardless of the Monitor
function setting.
1. Select the operating mode that you want to
monitor. (Example: USB)
2. Push .
FUNCTION
• Opens the FUNCTION screen.
3. Touch [MONI] to turn ON the Monitor function.
LTouching [MONI] turns the Monitor function ON or OFF.
4. If you want to adjust the monitor audio output,
touch [MONI] for 1 second.
5. Rotate to adjust MONITOR to the clearest
MULTI
audio output between 0% and 100%, while
speaking at your normal voice level.
6. To close the NOTCH menu, push
NOTE: When using the VOX function, turn OFF the
Monitor function. Otherwise the transmitted audio will
echo.
IP Plus function
The IP Plus function improves the Intermodulation
Distortion (IMD) quality by exerting the direct sampling
system performance.
This function optimizes the Analog/Digital Converter
(ADC) against the distortion when you receive a
strong input signal. It also improves the Third-order
Intercept Point (IP3) while minimizing the reduction of
the receive sensitivity.
1. Push
2. Touch [IP+].
3. To close the FUNCTION screen, push
Rotate
Push
.
EXIT
4-7
RECEIVING AND TRANSMITTING
.
FUNCTION
• The FUNCTION screen is displayed.
LTouch [IP+] to turn the IP Plus function ON or OFF.
L Select ON to prioritize the IP quality, and select OFF
to prioritize the receive sensitivity.
4
1
2
3
4
5
6
7
8
9
10
11
.
EXIT
12
13
14
15
16
17
18
19
20
21