Connectors - Icom IC-9700 Basic Manual
Vhf/uhf all mode transceiver
Hide thumbs
Also See for IC-9700:
- Advanced manual (173 pages) ,
- Service manual addendum (163 pages) ,
- Service manual (93 pages)
Table of Contents
Advertisement
8
SET MODE
Connectors
» SET > Connectors > External P�AMP
MENU
144M
430M
1200M
Selects whether or not to use an external preamplifier,
for each band.
The preamplifiers amplify received signals to improve
the S/N ratio and sensitivity.
• OFF: Does not use an external preamplifier.
• ON:
Uses an external preamplifier.
» SET > Connectors
MENU
External Speaker Separate
Sets the audio output when the external speaker is
connected.
• Separate: The MAIN band audio is output from the
[EXT-SP MAIN] jack, and the SUB band
audio is output from the [EXT-SP SUB]
jack.
• Mix:
Mix and output the audio of the MAIN
band and SUB band.
» SET > Connectors > Phones
MENU
Level
Sets the audio output level ratio of the headphone and
internal speaker between -15 and +15.
L/R Mix
Sets the audio output when the headphone is
connected.
• Separate: The MAIN band audio is output from
the left side, and the SUB band audio is
output from the right side.
• Mix:
Mix and output the audio of the MAIN
band and SUB band.
• Auto:
When the SUB band is displayed:
The MAIN band audio is output from
the left side, and the SUB band audio is
output from the right side.
When the SUB band is not displayed:
The MAIN band audio is output from the
left and right side.
(Default: OFF)
(Default: OFF)
(Default: OFF)
(Default: Separate)
(Default: 0)
(Default: Auto)
8-11
» SET > Connectors > ACC AF/IF Output
MENU
AF/SQL Output Select
Selects the audio and squelch signals to output from
the [ACC] (DIN 8-pin) socket in the MAIN/SUB bands.
• MAIN: Outputs the audio and squelch signals of the
MAIN band.
• SUB:
Outputs the audio and squelch signals of the
SUB band.
Output Select
Selects the signal output from [ACC].
• AF: An AF signal is output.
• IF: A 12 kHz IF signal is output.
AF Output Level
Sets the AF output level of [ACC], when "Output
Select" of ACC is set to "AF."
AF SQL
Selects whether or not to output the audio from [ACC],
according to the squelch state, when "Output Select"
of ACC is set to "AF."
• OFF (Open): The squelch is always opened
regardless of the transceiver's squelch
level.
• ON:
The squelch opens and closes,
according to the transceiver's squelch
level.
AF Beep/Speech��� Output
Sets the Beep and Speech audio output setting of
[ACC], when "Output Select" of ACC is set to "AF."
• OFF: The beep and speech audio are not output.
• ON:
The beep and speech audio are output.
IF Output Level
Sets the IF output level of [ACC], when "Output
Select" of ACC is set to "IF."
(Default: MAIN)
(Default: AF)
(Default: 50%)
(Default: OFF (Open))
(Default: OFF)
(Default: 50%)
- Quick Links:
- Rear Panel
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-9700 and is the answer not in the manual?
Questions and answers
Hi I cannot get my ic7900 to work on independe freq and green light sub is on plus I got main rev and sub in my screen .and cannot get my transceiver work with DUB function.on 2 meter please can you help ?
To resolve the issue where the Icom IC-9700 is not working on an independent frequency with the green Sub light on and the Dualwatch (DUB) function not functioning on 2 meters:
1. Confirm Dualwatch is Enabled: Hold down the OFF button for 1 second to turn the Dualwatch function ON. This activates independent monitoring of both Main and Sub bands.
2. Select the Proper Band: Touch the grayed frequency readout to select the active band. Ensure the Main and Sub bands are set to different frequencies and not both on 2 meters, as the same frequency cannot be set on both bands.
3. Check Band Settings: Ensure that the Sub band is not set to the same frequency or band as the Main. The IC-9700 supports independent operation on different bands, but not the same frequency on both Main and Sub.
4. Verify TX is on Main Band: Transmission is only possible on the Main band (except in Split Frequency mode), so ensure the Main band is the one you intend to transmit on.
5. Check for Mode Compatibility: Some functions only apply to the selected band and mode. Confirm that the correct mode (FM, SSB, etc.) is selected for the band in use.
Following these steps should allow independent frequency operation with Dualwatch enabled.
This answer is automatically generated