Icom IC-9700 Basic Manual page 27

Setting the frequency
D Entering a Band Edge (Continued)
Deleting a Band Edge
To enter a new band edge, first you must delete a
preset band edge.
1. On the FUNCTION set screen, select "User Band
Edge."
2. Touch the desired band edge to delete for 1
second.
(Example: 3: 1260.000.000 – 1300.000.000 MHz)
3. Touch "Delete."
• The selected band edge is deleted and returns to the
previous screen.
Entering a new Band Edge
After you delete or edit the preset band edges, you
can enter a new band edge.
1. On the FUNCTION set screen, select "User Band
Edge."
2. Select a blank band. (Example: 5)
3. Enter the lower band edge frequency, then touch
[ENT]. (Example: 430.1)
Entry example: [4] [3] [0]
4. Enter the upper band edge frequency, then touch
[ENT]. (Example: 439.9)
Entry example:
[4]
• The entered band edge is saved and returns to the
previous screen.
3-8
BASIC OPERATION
Rotate
Push
[1] [ENT]
[•]
[3] [9] [ENT]
[•] [9]
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21