Options - Icom IC-9700 Basic Manual

Audio scope screen
This audio scope enables you to display the received
signal's frequency component on the FFT scope, and
its waveform components on the Oscilloscope. The
FFT scope also has an waterfall.
Display the AUDIO SCOPE screen.
» AUDIO
MENU
AUDIO SCOPE screen
Key
Selects the attenuator for the FFT
Touch scope.
• 0 (OFF), 10, 20, or 30 dB
ATT
Touch for
Turns OFF the attenuator. (0 dB)
1 second
Sets the Hold function to ON or OFF.
HOLD • " " is displayed and freezes the current
HOLD
audio spectrum.
Selects the Oscilloscope level.
LEVEL
• 0, –10, –20, or –30 dB
Selects the Oscilloscope sweep time.
TIME
• 1, 3, 10, 30, 100, or 300 ms/Div
Selects the Expanded or Normal
Touch
screen.
EXPD/
SET
Touch for Enters the AUDIO SCOPE SET
1 second screen.
• AUDIO SCOPE screen
MAIN/SUB band icon*
Waterfall zone
FFT Scope zone
*Touching the MAIN/SUB band icon selects the displayed band.
Action
Oscilloscope
D AUDIO SCOPE SET screen
This screen is used to set the FFT scope waveform
type, color, Waterfall display and oscilloscope
waveform color.
1. Display the AUDIO SCOPE screen.
» AUDIO
MENU
2. Touch [SET].
3. Touch to select the item to set.
(Example: "FFT Scope Waveform Type")
4. Touch the option to set.
L See below for details on the setting items and their

options.

5. To close the AUDIO SCOPE SET screen, push
.
EXIT
TIP: You can set each item to its default by touching
the item for 1 second, and then touching "Default" on
the QUICK MENU.
FFT Scope Waveform Type
Select the type of waveform for the FFT scope.
• Line: Only the waveform outline is drawn.
• Fill: The full waveform is drawn in color.
FFT Scope Waveform Color
Set the waveform color for the FFT scope.
L Touch and select the R (Red), G (Green) or B (Blue)
scale, and then rotate
to 255.
L The color is displayed in the box above the RGB scale.
FFT Scope Waterfall Display
Turn the Waterfall display ON or OFF.
• OFF: Turns OFF the Waterfall display.
• ON: Turns ON the Waterfall display.
Oscilloscope Waveform Color
Set the waveform color for the Oscilloscope.
L Touch and select the R (Red), G (Green) or B (Blue)
scale, and then rotate
to 255.
L The color is displayed in the box above the RGB scale.
5-3
SCOPE OPERATION
(Default: Fill)
(Default: (R) 51 (G) 153 (B) 255)
to adjust the ratio from 0
MULTI
(Default: ON)
(Default: (R) 0 (G) 255 (B) 0)
to adjust the ratio from 0
MULTI
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21