Icom IC-9700 Basic Manual page 59

» SET > Function > SPLIT
MENU
SPLIT LOCK
Turns the Split Lock function ON or OFF.
The SPLIT LOCK function enables you to adjust the
transmit frequency while holding down
while the Dial Lock function is activated.
To prevent accidentally changing the receive
frequency by rotating
MAIN DIAL
LOCK and Dial Lock functions (p. 3-10).
• OFF: Turns OFF the function.
• ON: Turns ON the function.
» SET > Function
MENU
Auto Repeater
The Auto repeater function automatically turns the
duplex operation and tone encoder ON or OFF.
LThis item is displayed only in the USA version.
• OFF: Turns OFF the function.
• ON (DUP): Turns ON the duplex settings only.
• ON (DUP, TONE): Turns ON the duplex settings and
the tone encoder function.
RTTY Mark Frequency
Selects the RTTY mark frequency.
L When the internal RTTY decoder is used, 2125 Hz is
automatically selected.
RTTY Shift Width
Selects the RTTY shift width.
L When the internal RTTY decoder is used, 170 Hz is
automatically selected.
RTTY Keying Polarity
Selects the RTTY keying polarity.
• Normal: Key open/close = Mark/Space
• Reverse: Key open/close = Space/Mark
» SET > Function > SPEECH
MENU
SPEECH Language
Sets the speech language to English or Japanese.
Alphabet
Selects the alphabet characters announcement.
SPEECH Speed
Sets the speech speed to Fast or Slow.
RX Call Sign SPEECH
Turn the RX Call Sign Speech function ON or OFF for
calls received in the DV mode.
RX>CS SPEECH
Turn the RX>CS Speech function ON or OFF.
(Default: OFF)
, even
XFC
, use both the SPLIT
(Default: ON)
(Default: 2125)
(Default: 170)
(Default: Normal)
(Default: English)
(Default: Normal)
(Default: Fast)
(Default: ON (Kerchunk))
(Default: ON)
S-Level SPEECH
Turns the S-meter level announcement ON or OFF.
• OFF: The operating mode and the operating
frequency are announced when you push
• ON: The signal strength level, the operating mode
and the operating frequency are announced
when you push
MODE SPEECH
Turns the operating mode announcement ON or OFF.
• OFF: The selected operating mode is not announced.
• ON: The selected operating mode is announced.
SPEECH Level
Sets the Voice Synthesizer audio output level.
» SET > Function
MENU
[SPEECH/LOCK] Switch
Selects action.
SPEECH
• SPEECH/LOCK: Pushing
Synthesizer function.
Holding down
function ON or OFF.
• LOCK/SPEECH: Pushing
function ON or OFF.
Holding down
Voice Synthesizer function.
Lock Function
This function electronically locks
panel display* to prevent accidental changes.
* Keys and dials are also locked except for
, , and
AF RF/SQL POWER
Memo Pad Quantity
Sets the number of memo pad channels.
MAIN DIAL Auto TS
Sets the Auto Tuning Step function for
When rapidly rotating
automatically changes according to the rotation speed.
• OFF: Auto tuning step is turned OFF.
• Low: Approximately two times faster.
• High: Approximately five times faster when the
tuning step is set to 1 kHz or smaller.
Approximately two times faster when the
tuning step is set to 5 kHz or larger.
MIC Up/Down Speed
Selects the steps per second when changing
an operating frequency by holding down the
microphone's [UP]/[DN] key.
• Slow: Low speed (25 tuning steps/second)
• Fast: High speed (50 tuning steps/second)
8-4
SET MODE
(Default: ON)
.
SPEECH
(Default: OFF)
(Default: 50%)
(Default: SPEECH/LOCK)
turns ON the Voice
SPEECH
turns the Lock
SPEECH
turns the Lock
SPEECH
turns ON the
SPEECH
(Default: MAIN DIAL)
or the
MAIN DIAL
AF RF/SQL
SPEECH .
(Default: 5)
(Default: High)
MAIN DIAL
, the tuning step
MAIN DIAL
(Default: Fast)
8
1
.
SPEECH
2
3
4
5
6
7
8
9
10
11
12
13
14
15
,
16
17
18
.
19
20
21