Deleting A Data File - Icom IC-9700 Basic Manual
Vhf/uhf all mode transceiver
Hide thumbs
Also See for IC-9700:
- Advanced manual (173 pages) ,
- Service manual addendum (163 pages) ,
- Service manual (93 pages)
Table of Contents
Advertisement
Deleting a data file
Follow the steps below to delete the files you no
longer need on the SD card.
NOTE: Deleted data from a card cannot be recalled.
Before deleting any data, back up the card data onto
your PC.
1. Open the SAVE SETTING screen.
» SET > SD Card > Save Setting
MENU
2. Touch the file to delete for 1 second.
3. Touch "Delete."
LTo delete all files, touch "Delete All."
LTo cancel deleting, push
4. Touch [YES].
5. To close the SET screen, push
times.
Checking the file information
Touch "File Information" on the QUICK MENU to
display the file name, size and the saved date.
.
EXIT
several
EXIT
Displaying the card information
You can display the SD card capacity, and the time
remaining for voice recording.
1. Open the SD CARD screen.
» SET > SD Card
MENU
2. Touch "SD Card Info."
3. To close the SET screen, push
times.
6-4
6
SD CARD
1
2
3
4
5
6
7
8
9
10
11
12
several
EXIT
13
14
15
16
17
18
19
20
21
- Quick Links:
- Rear Panel
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-9700 and is the answer not in the manual?
Questions and answers
Hi I cannot get my ic7900 to work on independe freq and green light sub is on plus I got main rev and sub in my screen .and cannot get my transceiver work with DUB function.on 2 meter please can you help ?
To resolve the issue where the Icom IC-9700 is not working on an independent frequency with the green Sub light on and the Dualwatch (DUB) function not functioning on 2 meters:
1. Confirm Dualwatch is Enabled: Hold down the OFF button for 1 second to turn the Dualwatch function ON. This activates independent monitoring of both Main and Sub bands.
2. Select the Proper Band: Touch the grayed frequency readout to select the active band. Ensure the Main and Sub bands are set to different frequencies and not both on 2 meters, as the same frequency cannot be set on both bands.
3. Check Band Settings: Ensure that the Sub band is not set to the same frequency or band as the Main. The IC-9700 supports independent operation on different bands, but not the same frequency on both Main and Sub.
4. Verify TX is on Main Band: Transmission is only possible on the Main band (except in Split Frequency mode), so ensure the Main band is the one you intend to transmit on.
5. Check for Mode Compatibility: Some functions only apply to the selected band and mode. Confirm that the correct mode (FM, SSB, etc.) is selected for the band in use.
Following these steps should allow independent frequency operation with Dualwatch enabled.
This answer is automatically generated