Table of Contents
Advertisement
■ Function display (Matn scoeen)
q Status area
w Task area
e Information area
u Position Date and Time area
D Saaaus aoea
Indtcaaton
Scan
Displayed during a scan.
Displayed when the Noise Blanker
NB
function is ON.
Displayed when the Squelch function is
SQL
ON.
Displayed when the AGC function is
OFF.
D Innooraaton aoea
The 9 digit MMSI (Maritime Mobile Service Identity:
DSC self ID) code and the following indications are
displayed in the Information area.
Indtcaaton
Displayed when receiving a signal or
when the squelch is open.
Displayed while transmitting.
Displayed when the GPS receiver is
activated and valid position data is
received.
Blinks while invalid position data is
being received.
Blinks when there is an unread DSC
message.
Displayed when the internal speaker is
OFF.
r Channel and
Frequency area
t
y Software Key area
Description
Description
PANEL DESCRIPTION
Display area
q Saaaus aoea
Displays the current status.
w Task aoea
Displays up to 7 task icons.
e Innooraaton
Displays various icons and the
aoea
MMSI code.
r Channel and
Displays the selected
operating channel information.
Frequency area
• Displays the relative signal
t S/RF Meter
strength of the receive
signal.
• Displays the output power
level of the transmit signal.
y Software Key
Displays the key function for
aoea
each Software Key.
u Position Date
Displays the current position,
and Ttre aoea
date and time.
D Channel and Frequency area
Indtcaaton
Displayed when the Channel Select
mode is selected.
Displayed when the Group Select mode
is selected.
Displayed when the Clarity function is
ON. The number displays the added or
subtracted frequency.
Displayed when a Simplex channel is
SIMP
selected.
Displayed when a Duplex channel is
DUP
selected.
J3E/H3E/
LSB/J2B/
Displays the selected operating mode.
F1B/A1A
D Task aoea
Up to 7 task icons are displayed in the Task area
when the transceiver has a task.
Indtcaaton Description
Displayed while in the Radio Telephone
(RT) mode.
• "
" is displayed when the RT mode task
is activated.
• Disappears if no operation occurs during
the preset period of time.
Displayed after receiving a DSC call.
• "
" is displayed when the RX call task is
activated.
Displayed after making a DSC call.
• "
" is displayed when the TX call task is
activated.
2
Description
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
6
Advertisement
Table of Contents
