About The Sd Card Folders - Icom IC-9700 Basic Manual
Vhf/uhf all mode transceiver
Hide thumbs
Also See for IC-9700:
- Advanced manual (173 pages) ,
- Service manual addendum (163 pages) ,
- Service manual (93 pages)
Table of Contents
Advertisement
6
SD CARD
About the SD card folders
You can easily restore data with a backup file, even if
the setting data in the SD card is accidentally deleted.
IC-9700
Capture
Csv
Decode
QsoLog
Reply
RxLog
Setting
Voice
VoiceTx
GpsMemory
RptList
YourMemory
Rtty
yyyymmdd
yyyymmdd
The folder in the SD card contains the following.
• IC-9700 folder
The folders created in the IC-9700 are contained in
this folder.
• Capture folder
Saves the captured screen data in the "png" or
"bmp" format.
• Csv folder
Contains the GPS Memory, Repeater List and Your
Call Sign Memory folders.
• GpsMemory folder
Saves the Gps Memory in the "csv" format to import.
• RptList folder
Saves the Repeater List in the "csv" format to import.
• YourMemory folder
Saves the Your Call Sign Memory in the "csv" format
to import.
• Decode folder
Saves the RTTY decode log.
• Rtty folder
Saves the transmitted or received RTTY decode log
data in the "txt" or "html" format.
• QsoLog folder
Saves QSO log data in the "csv" format.
• Reply folder
Saves Automatic reply data in the "wav" format.
• RxLog folder
Saves RX record log data in the "csv" format.
• Setting folder
Saves the transceiver's setting data in the "icf"
format.
• Voice folder
Creates the recorded QSO audio date folders.
• yyyymmdd folder
Saves the recorded audio file in the "wav" format.
The folder name is automatically created in the
following format:
yyyymmdd (yyyy: year, mm: month, dd: day)
• VoiceTx folder
Saves the recorded voice audio data for the Voice
TX function in the "wav" format.
6-7
- Quick Links:
- Rear Panel
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-9700 and is the answer not in the manual?
Questions and answers
Hi I cannot get my ic7900 to work on independe freq and green light sub is on plus I got main rev and sub in my screen .and cannot get my transceiver work with DUB function.on 2 meter please can you help ?
To resolve the issue where the Icom IC-9700 is not working on an independent frequency with the green Sub light on and the Dualwatch (DUB) function not functioning on 2 meters:
1. Confirm Dualwatch is Enabled: Hold down the OFF button for 1 second to turn the Dualwatch function ON. This activates independent monitoring of both Main and Sub bands.
2. Select the Proper Band: Touch the grayed frequency readout to select the active band. Ensure the Main and Sub bands are set to different frequencies and not both on 2 meters, as the same frequency cannot be set on both bands.
3. Check Band Settings: Ensure that the Sub band is not set to the same frequency or band as the Main. The IC-9700 supports independent operation on different bands, but not the same frequency on both Main and Sub.
4. Verify TX is on Main Band: Transmission is only possible on the Main band (except in Split Frequency mode), so ensure the Main band is the one you intend to transmit on.
5. Check for Mode Compatibility: Some functions only apply to the selected band and mode. Confirm that the correct mode (FM, SSB, etc.) is selected for the band in use.
Following these steps should allow independent frequency operation with Dualwatch enabled.
This answer is automatically generated