Saving User Setups; Recalling A Saved Setup; Start-Up Configuration - Keithley 3700A Series Reference Manual

Series 3700A System Switch/Multimeter Reference Manual

Saving user setups

You can save the present Series 3700A setup to internal nonvolatile memory or a USB flash drive.
To save a user setup to nonvolatile memory from the front panel:
1. Configure the Series 3700A to the settings that you want to save.
2. Press the MENU key.
3. Select SETUP and then press the ENTER key.
4. Select the SAVE menu item and then press the ENTER key.
5. Select INTERNAL and then press the ENTER key.
6. Select the user number (1 through 5), and press the ENTER key.
To save a user setup to an external USB flash drive from the front panel:
1. Configure the Series 3700A to the settings that you want to save.
2. Insert the USB flash drive into the USB port on the front panel of the Series 3700A.
3. Press the MENU key.
4. Select SETUP and then press the ENTER key.
5. Select SAVE and then press the ENTER key.
6. Select USB. The file name setup000.set is displayed.
7. Turn the navigation wheel
ENTER key.

Recalling a saved setup

You can recall setups from internal nonvolatile memory or a USB flash drive at any time.
To recall a saved setup from the front panel:
1. Press the MENU key to access the main menu.
2. Select SETUP, and then press the ENTER key.
3. Select the RECALL menu item, and then press the ENTER key.
4. Select one of the following:
▪
INTERNAL
▪
USB
▪
USB only: Select the appropriate file and then press the ENTER key.

Start-up configuration

You can specify the Series 3700A start-up (power-on) configuration from the front panel. Set the
start-up configuration to a previously stored setup (recalled from internal nonvolatile memory).
To select the power-on setup:
1. Press the MENU key to access the main menu.
2. Select SETUP, and then press the ENTER key.
3. Select POWERON, and then press the ENTER key.
4. Select the configuration you want to use on startup.
5. Press the ENTER key.
6. Press the EXIT (LOCAL) key to return to the main menu.
3700AS-901-01 Rev. D/June 2018
to change the last three digits of the file name and then press the
Section 3: Instrument description
3-31