Lan.status.dns.address[N] - Keithley 3700A Series Reference Manual

Section 11: TSP command reference
Details
The settings that are restored are shown in the following table.
Settings that are restored to default
Attribute
lan.config.dns.address[N]
lan.config.dns.domain
lan.config.dns.dynamic
lan.config.dns.hostname
lan.config.dns.verify
lan.config.gateway
lan.config.ipaddress
lan.config.method
lan.config.subnetmask
lan.lxidomain
localnode.password
The lan.restoredefaults() function does not reset the LAN password. The
localnode.password attribute controls the web password, which can be reset separately.
This command is run when lan.reset() is sent.
Example
lan.restoredefaults()
Also see
lan.reset() (on page 11-265)
localnode.password

lan.status.dns.address[N]

This attribute contains the DNS server IP addresses.
Type TSP-Link accessible
Attribute (R) Yes
Usage
dnsAddress = lan.status.dns.address[N]
dnsAddress
N
11-266
Default setting
"0.0.0.0"
""
lan.ENABLE
"K-<model number>-<serial number>"
lan.ENABLE
"0.0.0.0"
"0.0.0.0"
lan.AUTO
"255.255.255.0"
0
"admin"
(on page 11-286)
Affected by
Not applicable
DNS server IP address
Entry index (1, 2, or 3)
Series 3700A System Switch/Multimeter Reference Manual
Restores the LAN defaults.
Where saved Default value
Not applicable Not applicable
3700AS-901-01 Rev. D/June 2018