Basic Dmm Operation; Dmm Measurement Capabilities - Keithley 3700A Series Reference Manual

In this section:

DMM measurement capabilities ............................................... 4-1

High-energy circuit safety precautions ..................................... 4-2
Performance considerations ..................................................... 4-2
System considerations ............................................................. 4-6
Voltage measurements (DC volts and AC volts) ...................... 4-9
Current measurements (DC current and AC current) ............. 4-14
Resistance measurements ..................................................... 4-16
Temperature measurements .................................................. 4-22
Frequency and period measurements .................................... 4-41
Continuity testing .................................................................... 4-44
Refining measurements ......................................................... 4-47
DMM measurement capabilities
The DMM is not available on the Models 3706-S or 3706-SNFP.
The DMM of the Series 3700A can make the following measurements:
•
DC voltage measurements from -10 nV to 300 V
•
AC voltage measurements from 100 nV to 300 V
•
DC current measurements from 1pA to 3.0 A
•
AC current measurements from 1 nA to 3.0 A
•
Two-wire resistance measurements from 1 µΩ to 120 MΩ
•
Four-wire resistance measurements from 100 µΩ to 120 MΩ
•
Commonside ohms resistance measurements from 1 µΩto 2 kΩ
•
Frequency measurements from 3 Hz to 500 kHz
• Period measurements from 2 s to 330 ms
•
Temperature measurements from -200 °C to 1820 °C
•
Continuity testing using the 1 kΩ range
When using a switching module, do not exceed the maximum signal levels of the module.
For information on verification and calibration of the DMM, see

Basic DMM operation

Verification (on page B-1).
Section 4