Tspnet.disconnect(); Tspnet.execute() - Keithley 3700A Series Reference Manual

Section 11: TSP command reference

tspnet.disconnect()

This function disconnects a specified TSP-Net session.
Type TSP-Link accessible
Function No
Usage
tspnet.disconnect(connectionID)
connectionID
Details
This function disconnects the two devices by closing the connection. The connectionID is the
session handle returned by tspnet.connect().
For TSP-enabled devices, this aborts any remotely running commands or scripts.
Example
testID = tspnet.connect("192.0.2.0")
-- Use the connection
tspnet.disconnect(testID)
Also see
tspnet.connect()

tspnet.execute()

This function sends a command string to the remote device.
Type TSP-Link accessible
Function No
Usage
tspnet.execute("connectionID", "commandString")
value1 = tspnet.execute("connectionID", "commandString", formatString)
value1, value2 = tspnet.execute("connectionID", "commandString", formatString)
value1, ..., valueN = tspnet.execute("connectionID", "commandString", formatString)
connectionID
commandString
value1
value2
valueN
...
formatString
11-436
Affected by
The connection ID returned from tspnet.connect()
(on page 11-434)
Affected by
The connection ID returned from tspnet.connect()
The command to send to the remote device
The first value decoded from the response message
The second value decoded from the response message
The Nth value decoded from the response message; there is one return value for
each format specifier in the format string
One or more values separated with commas
Format string for the output
Series 3700A System Switch/Multimeter Reference Manual
Where saved Default value
Create a TSP-Net session.
Close the session.
Where saved Default value
3700AS-901-01 Rev. D/June 2018