Comm.lan.vxi11.Enable - Keithley 3700A Series Reference Manual

Section 11: TSP command reference
Example
comm.lan.enable = true
comm.lan.telnet.enable = false
Also see
comm.lan.enable
comm.lan.rawsockets.enable

comm.lan.vxi11.enable

comm.lan.web.enable
lan.status.port.telnet
Telnet connection
comm.lan.vxi11.enable
This attribute describes whether or not communication using a VXI-11 connection is enabled.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
state = comm.lan.vxi11.enable
comm.lan.vxi11.enable = state
state
Details
This performs the same function as the MENU > LAN > ENABLE > VXI11 option that is available
through the front panel of the instrument.
Example
comm.lan.enable = true
comm.lan.vxi11.enable = false
Also see
comm.lan.enable
comm.lan.rawsockets.enable
comm.lan.telnet.enable
comm.lan.web.enable
lan.status.port.vxi11
VXI-11 connection
11-108
(on page 11-106)
(on page 11-107)
(on page 11-108)
(on page 11-109)
(on page 11-271)
(on page A-15)
Affected by
Not applicable
true: Enabled
false: Disabled
(on page 11-106)
(on page 11-107)
(on page 11-107)
(on page 11-109)
(on page 11-271)
(on page A-15)
Series 3700A System Switch/Multimeter Reference Manual
Enable all LAN communication with
instrument, then disable only Telnet over the
LAN.
Where saved Default value
Nonvolatile true (enabled)
memory
Enable all LAN communication with
instrument, then disable only VXI-11 over the
LAN.
3700AS-901-01 Rev. D/June 2018