Buffervar.appendmode - Keithley 3700A Series Reference Manual

Section 11: TSP command reference
Details
This function returns result, which is the result of toggling the bit index in value.
Any fractional part of value is truncated to make it an integer. The returned value is also an integer.
The least significant bit of value is at index position 1; the most significant bit is at index
position 32.
The indexed bit for value is toggled from 0 to 1, or 1 to 0.
Example
testResult = bit.toggle(10, 3)
print(testResult)
Also see
Bit manipulation and logic operations
bit.clear() (on page 11-11)
bit.get() (on page 11-11)
bit.set() (on page 11-13)
bit.test() (on page 11-15)

bufferVar.appendmode

This attribute sets the state of the reading buffer's append mode.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
state = bufferVar.appendmode
bufferVar.appendmode = state
state
bufferVar
11-16
(on page 9-21)
Affected by
Instrument reset
Recall setup
The reading buffer append mode; set to one of the following:
▪
0: Append mode off; new measurement data overwrites the previous buffer
content
▪
1: Append mode on; appends new measurement data to the present buffer
content
The reading buffer
Series 3700A System Switch/Multimeter Reference Manual
The binary equivalent of decimal 10 is 1010. Toggling
the bit at index position 3 returns a decimal value of 14
(binary 1110).
Output:
1.40000e+01
Where saved
Create configuration script
Saved setup
3700AS-901-01 Rev. D/June 2018
Default value
See Details