Lan.trigger[N].Disconnect(); Lan.trigger[N].Event_Id - Keithley 3700A Series Reference Manual

Section 11: TSP command reference

lan.trigger[N].disconnect()

This function disconnects the LAN trigger.
Type TSP-Link accessible
Function Yes
Usage
lan.trigger[N].disconnect()
N
Details
For TCP connections, this closes the TCP connection.
The LAN trigger automatically disconnects when either the lan.trigger[N].protocol or
lan.trigger[N].ipaddress attributes for this event are changed.
Also see
lan.trigger[N].ipaddress
lan.trigger[N].protocol

lan.trigger[N].EVENT_ID

This constant is the event identifier used to route the LAN trigger to other subsystems (using stimulus properties).
Type TSP-Link accessible
Constant Yes
Usage
lan.trigger[N].EVENT_ID
N
Details
Set the stimulus of any trigger event detector to the value of this constant to have it respond to
incoming LAN trigger packets.
Example
digio.trigger[14].stimulus = lan.trigger[1].EVENT_ID Route occurrences of triggers
Also see
None
11-276
Affected by
The LAN event number (1 to 8)
(on page 11-277)
(on page 11-279)
Affected by
The LAN event number (1 to 8)
Series 3700A System Switch/Multimeter Reference Manual
Where saved Default value
Where saved Default value
on LAN trigger 1 to digital I/O
trigger 14.
3700AS-901-01 Rev. D/June 2018