Comm.gpib.enable; Comm.lan.enable - Keithley 3700A Series Reference Manual

Section 11: TSP command reference

comm.gpib.enable

This attribute describes whether or not communication using the GPIB connection is enabled.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
state = comm.gpib.enable
comm.gpib.enable = state
state
Details
This performs the same function as the MENU > GPIB > ENABLE option that is available through the
front panel of the instrument.
Also see
Set the GPIB address

comm.lan.enable

This attribute controls whether or not any communication using the LAN connection is enabled.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
state = comm.lan.enable
comm.lan.enable = state
state
Details
This is the master control setting. When this is true (enabled), you may individually control web,
Telnet, VXI-11 and raw socket access to the instrument. However, when this is false (disabled), all
LAN communication is disabled and this overrides the individual LAN enabled settings.
To disable only certain LAN communication with the instrument, enable this attribute and set the
specific LAN communication attribute to false for raw sockets, Telnet, VXI-11 or web.
Example
comm.lan.enable = false
Also see
comm.lan.rawsockets.enable
comm.lan.telnet.enable
comm.lan.vxi11.enable
comm.lan.web.enable
11-106
Affected by
Not applicable
true: Enabled
false: Disabled
(on page 2-12)
Affected by
Not applicable
true: Enabled
false: Disabled
Disable all LAN communication with instrument.
(on page 11-107)
(on page 11-107)
(on page 11-108)
(on page 11-109)
Series 3700A System Switch/Multimeter Reference Manual
Where saved Default value
Nonvolatile true (enabled)
memory
Where saved Default value
Nonvolatile true (enabled)
memory
3700AS-901-01 Rev. D/June 2018