Lan.config.dns.dynamic; Lan.config.dns.hostname - Keithley 3700A Series Reference Manual

Section 11: TSP command reference

lan.config.dns.dynamic

Enables or disables the dynamic DNS registration.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
state = lan.config.dns.dynamic
lan.config.dns.dynamic = state
state
Details
Dynamic DNS registration works with DHCP to register the host name with the DNS server. The host
name is specified in the lan.config.dns.hostname attribute.
Example
print(lan.config.dns.dynamic)
Also see

lan.config.dns.hostname

lan.restoredefaults()
lan.config.dns.hostname
This attribute defines the dynamic DNS host name.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
hostName = lan.config.dns.hostname
lan.config.dns.hostname = hostName
hostName
11-260
Affected by
LAN restore defaults
The dynamic DNS registration state. It may be one of the following values:
▪
1 or lan.ENABLE: Enabled
▪
0 or lan.DISABLE: Disabled
Outputs the dynamic registration state.
If dynamic DNS registration is enabled, the response is:
1.00000e+00
(on page 11-260)
(on page 11-265)
Affected by
Not applicable
The host name to use for dynamic DNS registration; the host name must:
▪
be a string of 15 characters or less
▪
start with a letter
▪
end with a letter or digit
▪
contain only letters, digits, and hyphens
Series 3700A System Switch/Multimeter Reference Manual
Where saved Default value
Nonvolatile memory 1 (lan.ENABLE)
Where saved
Nonvolatile memory
3700AS-901-01 Rev. D/June 2018
Default value
Instrument specific
(see Details)