Digio.trigger[N].Release(); Digio.trigger[N].Reset() - Keithley 3700A Series Reference Manual

Series 3700A System Switch/Multimeter Reference Manual

digio.trigger[N].release()

This function releases an indefinite length or latched trigger.
Type TSP-Link accessible
Function Yes
Usage
digio.trigger[N].release()
N
Details
Releases a trigger that was asserted with an indefinite pulsewidth time. It also releases a trigger that
was latched in response to receiving a synchronous mode trigger. Only the specified trigger line is
affected.
Example
digio.trigger[4].release()
Also see
digio.trigger[N].assert()
digio.trigger[N].pulsewidth

digio.trigger[N].reset()

This function resets trigger values to their factory defaults.
Type TSP-Link accessible
Function Yes
Usage
digio.trigger[N].reset()
N
Details
This function resets the following attributes to factory default settings:
▪
digio.trigger[N].mode
▪
digio.trigger[N].pulsewidth
▪
digio.trigger[N].stimulus
It also clears digio.trigger[N].overrun.
3700AS-901-01 Rev. D/June 2018
Affected by
Digital I/O trigger line (1 to 14)
(on page 11-116)
(on page 11-120)
Affected by
Digital I/O trigger line (1 to 14)
Section 11: TSP command reference
Where saved Default value
Releases digital I/O trigger line 4.
Where saved Default value
11-121