6.2.3 Writing Data to the Connection Information Setting Area
The necessary data is written to the connection information setting area (Bank 0: Addresses 250H to
2CFH) of the shared memory using the shared memory writing instructions F151 (WRT) and P151
(PWRT).
The connection information setting area consists of eight blocks, to match the number of connections.
-
The offset address contents from the table in the next page are allocated for the various connections.
-
Key Point:
Offset addresses 0 to 8 are written before open processing is carried out.
-
Offset addresses D and F are used when communication processing is being carried out using the
-
transparent communication function.
6-9